Unicas 3013 silicone sealant

UNICAS 3013 SILICONE SEALANT
UNICAS 3013 is a one-component acrylic dispersion based elastic sealant and insulator reinforced with a high adhesion silicone emulsion.
it's material.
PECULIARITIES
· Elastic.
Has a shiny and slippery appearance.
It can be used on all porous surfaces such as brick, concrete and wood.
Resistant to rain, snow and sunlight.
· Do not use in areas that are constantly exposed to water.
· Immediately after application, the surface of the mastic can be smoothed with a damp sponge or finger.
· Waterproof after curing.
Does not hold mold
SCOPE OF APPLICATION
Leave the area dry for 2 hours after application.
· The surfaces to be applied must be free from dust, dirt and oil.
APPLICATION
BEST BEFORE DATE
· Joint width min. 5 mm, max. Should be 25 mm. The recommended ratio of joint width and joint depth is 2/1.
When assembling door and window joinery, filling gaps
· 0 0 џ Application temperature from +5 C to +40 C.
It is easy to apply and clean.
· Without solvents.
· It is not necessary to use a primer for non-porous surfaces. Acrylic mastic can be thinned with water and used as a primer on porous surfaces.
Repairing cracks in walls and ceilings
IMPORTANT
· Under painting. It is odorless.
As a sealant in the joints of building elements such as wood, concrete and brick.
15 months when stored in original, unopened packaging under appropriate conditions.
SILICONE SEALANT
Due to siliconization, joint mobility up to 15% is observed. Water based. Not toxic. Very low
Volatile Emissions Content (VOC). Water-resistant and sun-drying. Without smell. Easy to use.
Residues are easily cleaned with water. Excellent adhesion to most building materials. Paintable.
AREAS OF USE
Sealing, filling medium-moving joints and raw materials. Sealing
window and door frames. Places where impermeability is required. Filling potholes and cracks in ceilings and walls. Sealing
when installing plumbing fixtures