Gypsum putty (finish)

Gypsum putty (finish)

Gypsum-based dry building putty mixture with various additives. Designed for leveling stone, brick, gypsum and other surfaces during internal work during the construction, repair and reconstruction of buildings and structures. The putty mixture can also be used as a base for the subsequent application of decorative coatings (paints, etc.) on it. Easy to apply, smooth and sand. It has good adhesion to concrete and drywall. Does not curl when applying subsequent coats and does not crack when dry. Creates a flat and smooth surface

APPLICATION:

Before use, the surface must be cleaned of all kinds of obstructing materials: dust, grease and other contaminants. Gypsum is poured into a container with clean water in an appropriate amount and aged for 2-3 minutes. To eliminate lumps, it is advisable to mix with a mixer. Ready-to-use mixture should be used within one hour. Do not add water and gypsum to the mixture prepared in advance.

The required outdoor temperature is at least +5°C.

SPECIFICATIONS:

Mixing ratio: 7 liters of water per 10 kg of gypsum

Usage time: 60 minutes

Hardening: 120-150 minutes

Application area: 1kg/m2 (thickness 1mm)

Surface Hardness: 40 Shore D

The above values may change depending on external parameters. It must be stored in the original packaging and in a dry place. If the product is stored closed (in its original packaging), it is allowed to fold up to a maximum of 10 rows from the top.