Plaster Gypsum Superlaster
SUPERLASTER-gypsum plaster. Easily applied to the surface of masonry, concrete, in-situ concrete, etc. wall coverings, does not need any additional material and has a high adhesive ability. Can be used directly on the surface of brickwork, concrete, aerated concrete, etc. on walls 1-50 mm thick. Absorbs air and thus balances the level of humidity. Very light, provides thermal insulation. Doesn't drip or gather. One of the components of the structure is water, which provides a difficult ignition of the material.
APPLICATION:
Before use, the surface must be cleaned of any kind of materials that prevent adhesion, such as dust, grease, etc. Dry and hot surfaces must be wetted before use. SUPERLASTER gypsum plaster is poured into a container with clean water in an appropriate amount, mixed with a mixer and left for 4-5 minutes. The solution is stirred until the lumps disappear to a homogeneous mass. Do not add water or gypsum to the ready-to-use solution.
Required outside temperature +10*С +35*С.
No reviews found