EXTRA Cement based tile adhesive
EXTRA Cement based tile adhesive
DESCRIPTION:
Special ready-made dry adhesive based on cement and quartz sand with polymer additives, used in interior and exterior cladding. It is used for gluing on the surface of bathroom, swimming pool and other areas with high humidity, tiles, ceramic tiles, marble tiles, etc.
APPLICATION:
The surface must be free of dust, oil, paint, etc. If the surface temperature is over 25*C, then the surface should be moistened with water. Pour the required amount of the solution into a container with water and mix (preferably with a mixer) until the lumps disappear. The mixture should stand for 10 minutes. Then you need to mix well again, after which the solution is ready for use. The solution is applied to the surface using a trowel with a suitable comb. The solution prepared for use must be used within 2-3 hours. Otherwise, it cannot be used by adding water or glue to the solution. Grouting must be done after 24 hours.
Required outside temperature +10*С +35*С.
No reviews found