Tile glue
Designed for exterior and interior work in dry, wet and wet rooms, when facing walls and floors with ceramic tiles and tiles made of natural stone. It is applied on concrete, cement, brick non-deformable bases.
Usage temperature +5 C / +35°C;
The required amount of water per 1 kg of dry mix is 0.24 – 0.25 liters;
Layer thickness 3-4 mm;
The consumption of the mixture is 3-4 kg/m2;
The viability of the solution is 2-3 hours;
Tile position adjustment time 15-20 min;
Curing time 24 hours;
Tear-off strength of at least 0.5MPa;
Compressive strength of at least 20 MPa;
Frost resistance of at least 30 cycles.
Preparation of the foundation
The base must be strong and free of dirt, dust, oil and bitumen stains that prevent adhesion to the base. To prevent a decrease in the adhesion strength of the mixture, the base must be treated with water.
When performing work, ensure a temperature of up to +35 ° C. It is forbidden to work in direct sunlight. It is necessary to use shading.
Preparation of the solution
To prepare the solution, pour the dry mixture into a container with clean water (0.24-0.25 liters per 1 kg of dry mixture) and mix thoroughly. We recommend mixing with a mixer. Leave the solution for 5 minutes and mix again. The prepared portion of the solution should be consumed within 1.5 - 2 hours.
Packaging
In three-layer moisture-resistant kraft bags: 25 kg.
No reviews found